Foundation Sleeve - galvanized steel - w/base plate, support plate, grounding spike - centering wedges - 4 ft. depth

The most common type of flagpole installation is the in-ground foundation sleeve method which calls for 1 ft. of the flagpole to be encased in the ground sleeve for each 10 ft. of exposed flagpole height. The diameter of the sleeve should be at least 2 in. greater than the outside diameter of the flagpole with the area between the flagpole and the sleeve filled with dry sand. Sleeves with a 6 in. diameter are supplied with a base plate and grounding spike. Sleeves with a diameter of greater than 6 in. are supplied with a base plate, support plate, grounding spike and for ease of vertical alignment, steel centering wedges welded to the inside of the base plate. If you require other sizes than we have on our website or have special on-site conditions - please contact us. The length on "A" is 4 ft. - "B" diameter is 12 in. - base plate and ground spike length "C" is 18 in. - support plate "F" is 8 in. - "E" is base plate width 16 in. - plus the steel centering wedges are on this sleeve.

Foundation Sleeve - galvanized steel - w/base plate, support plate, grounding spike - centering wedges - 4 ft. depth

Flagpole Parts & Accessories
$220.00
Foundation Sleeve - galvanized steel - w/base plate, support plate, grounding spike - centering wedges - 4 ft. depth

Foundation Sleeve - galvanized steel - w/base plate, support plate, grounding spike - centering wedges - 4 ft. depth

Flagpole Parts & Accessories
$220.00
$220.00
The most common type of flagpole installation is the in-ground foundation sleeve method which calls for 1 ft. of the flagpole to be encased in the ground sleeve for each 10 ft. of exposed flagpole height. The diameter of the sleeve should be at least 2 in. greater than the outside diameter of the flagpole with the area between the flagpole and the sleeve filled with dry sand. Sleeves with a 6 in. diameter are supplied with a base plate and grounding spike. Sleeves with a diameter of greater than 6 in. are supplied with a base plate, support plate, grounding spike and for ease of vertical alignment, steel centering wedges welded to the inside of the base plate. If you require other sizes than we have on our website or have special on-site conditions - please contact us. The length on "A" is 4 ft. - "B" diameter is 12 in. - base plate and ground spike length "C" is 18 in. - support plate "F" is 8 in. - "E" is base plate width 16 in. - plus the steel centering wedges are on this sleeve.